相关文章

全自动超声波清洗机讲解超声波工业加湿器的使用及保养

说钙镁离子含量高,加上水厂处理水时使用漂白粉等一些净水剂,这些成份对加湿器加湿而言,非常不利,一部分钙镁离子随水雾一起喷出,弥散在物体表面和地面上,干燥后形成“白粉”状的水垢,另一部分沉淀在换能片及水槽表面,形成固体水垢,这都是水质不纯造成,而且换能片表面结垢后,会影响加湿效果,甚至不及时清洗会导致换能片负荷加,烧坏换能片及电子原件。

1 ultrasonic humidifier is best to use pure water wet, because many areas hard water is the calcium and magnesium concentrations are high, and water treatment plant water use bleaching powder and other water purification agent, these components is very unfavorable to the humidifier humidification, part, calcium and magnesium ions ejected together with water mist, diffusion on the surface and the ground, "the scale formed after drying powder like", another part of precipitation in the transducer and the surface of the water tank, the formation of solid scale, which are caused by water impurities, and the energy change sheet surface scaling, will affect the humidifying effect, even not timely cleaning will cause the change can piece load plus, burn the energy change sheet and electronic components.

2.定时更换水箱中的陈水,因为水存放时间过长,水质会了生变化,所以长时不使用时,水箱及水槽中勿存水。

2 regular replacement of water in the old water, because the water storage for a long time, the water will change, so do not use long, the water tank and the water storage tank is not.

3.请勿在水箱中加入劣质添加剂(如香水),容易造成水箱和底座着水部位出现裂缝,影响机器正常工作。

3 do not join inferior additives in the water tank (such as perfume), easy to cause the water tank and a water base crack position, affect the normal work of the machine.

4 humidifier collection when you will water parts cleaning, dry, dry ventilated place is best placed into after the packing box. "Note: do not use plastic bags."

首先要断开电源,进行操作。

First disconnect the power supply, operation.

其次要用专用清洗剂进行清除,清洗时向换能片表面滴5—8滴清洗液,当然也要根据结垢程度酌情增减,直至除去水垢为止,注意不可用硬质工具来强制除垢,以免划伤换能片。

Secondly, to use special cleaning agent for cleaning surface, can drop 5 - 8 drops of the cleaning liquid to change when cleaning, of course, also according to the fouling degree of escalation, until the removal of scale so far, be careful not to use hard tool to mandatory removal, so as not to scratch the energy change sheet.